Download Firmware Nokia TA-1032 (Nokia 3) Read CM2 Dongle
Download Nokia TA-1032 (Nokia 3) Firmware in Indonesian, suitable for Hank logo cases and it could also be a blackout or crash due to the wrong flash file.
The Nokia TA1032 firmware is backed up from the Infinity CM2 dongle from a normal cellphone. Because the actual condition is that I forgot my Google account (FRP), after I tried bypassing FRP, I just read the file, I can flash it again on a cellphone of the same type.
Previously, I was also confused by this Nokia 3 cellphone, because the Dim Screen notification always appeared when turned on, in more detail it was written like this:
The screen is dimmed by the Talkback accessibility service, swipe down then right to open the global context menu, check "brighten the screen" then double tab. Screen dimming can be controlled from talkback settings
It turns out that the way to get rid of the dim screen notification on talkback is, just press and hold volume up and down for around 3 to 5 seconds until the 'deactivate talkback' screen appears, then it can return to normal.
For brief specifications of the Nokia TA1032, as seen in the pictures above and below, the Android version is 9, the build number is 00WW_5_180_SP04
How to Flash Nokia 3 TA1032:
We recommend using a paid dongle/tool, because it is possible that if you use SP Flashtool you will need to have DA files
Or, for example, if you already have DA Files, please use SP Flashtool according to the version that supports it
Insert the scatter file and flash as usual
for Nokia TA-1032 boot button is two volumes (up and down press simultaneously, plug in USB cable)
And because this is a CM2 reading result, we recommend using the CM2 dongle for flashing
The following is the log of read results "
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1632 (COM6)
MODE : BOOTROM
PORT : 6
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : 913EAE495C723D0A8DFDCD88ED478DC1
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SEC : 0x00000001
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6735
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 13014E51324A3936521004BFC9C872B3
DAInf: 4 : 2 : 155
DA : EXT_RAM NOT initialized!
eMMC : OK
eMMC : 514E011336394A32BF041052B372C8C9
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
DRAM : 0x0178
EMI : DEV : FireFly
EMI : SRC : preloader_ne1.bin
EMI : CNT : 0005
EMI : [00] : ID : 450100444634303136 : VEN : SANDISK | DEV : DF4016 : RAM : [ 2.00 GB ]
EMI : [01] : ID : 90014A484147346132 : VEN : HYNIX | DEV : HAG4a2 : RAM : [ 2.00 GB ]
EMI : [02] : ID : 150100514531334D42 : VEN : SAMSUNG | DEV : QE13MB : RAM : [ 2.00 GB ]
EMI : [03] : ID : 13014E51324A393652 : VEN : MICRON | DEV : Q2J96R : RAM : [ 2.00 GB ]
EMI : [04] : ID : 150100464E58324D42 : VEN : SAMSUNG | DEV : FNX2MB : RAM : [ 1.00 GB ]
EMI : Init EMI from PRELOADER
INIT : 0xBC : DRAM [ 0x00000000 : [ 0 B ] ]
DRAM : DRAM: 0x80000000 [ 2.00 GB ]
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info
EMMC: CID : 13014E51324A3936521004BFC9C824B3
EMMC: VEN : MICRON : OEM : 78 : ID : 51324A393652 : PRV : 0x10
EMMC: VEN : MICRON : Q2J96R
EMMC: SNN : 79677896 ( 0x04BFC9C8 ) , MF : 2/2017
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3AB400000 [ 14.68 GB ]
SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]
CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : 616BAFA1FA67029E91BD9746BCEC482B
STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT
DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM11)
MODE : PRELOADER PORT
PORT : 11
Boot done!
Patch Level : PPR1.180610.011
Display ID : 00WW_5_18D
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2020-09-05
Build Time : 27.08.2020
Product Model : NE1
Product Brand : alps
Product Name : NE1_00WW_FIH
Product Device : NE1
Product Manfct : alps
Product Info : NE1
USERDATA : FILESYSTEM : EXT4 with FDE ( Full Disk Encryption ***)
NVRAM : 0x130067820
NVRAM : State : Ok!
INFO : WiFi MAC : CC9F7A7A0124
INFO : BlTh MAC : CC9F7A7A0123
INFO : IMEI[1] : 356043080165822
INFO : IMEI[2] : 356043080165830
Backup sensetive data [ 18 ]
Backup path : Backup\MT6735__913EAE495C723D0A8DFDCD88ED478DC1\
[3] Read : NVRAM
[24] Read : NVDATA
[2] Read : PROINFO
[6] Read : LK
[4] Read : PROTECT1
[0] Read : PRELOADER
Backup done!
Done!
Elapsed: 00:01:53
Operation : Reset Settings/Format FS [ v2.33 ]
Mode : FULL FACTORY ( FORCED + FRP )
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1632 (COM6)
MODE : BOOTROM
PORT : 6
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : 913EAE495C723D0A8DFDCD88ED478DC1
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x00000001
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6735
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 13014E51324A3936521004BFC9C872B3
DAInf: 4 : 2 : 155
DA : EXT_RAM NOT initialized!
eMMC : OK
eMMC : 514E011336394A32BF041052B372C8C9
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
DRAM : 0x0178
EMI : DEV : FireFly
EMI : SRC : preloader_ne1.bin
EMI : CNT : 0005
EMI : [00] : ID : 450100444634303136 : VEN : SANDISK | DEV : DF4016 : RAM : [ 2.00 GB ]
EMI : [01] : ID : 90014A484147346132 : VEN : HYNIX | DEV : HAG4a2 : RAM : [ 2.00 GB ]
EMI : [02] : ID : 150100514531334D42 : VEN : SAMSUNG | DEV : QE13MB : RAM : [ 2.00 GB ]
EMI : [03] : ID : 13014E51324A393652 : VEN : MICRON | DEV : Q2J96R : RAM : [ 2.00 GB ]
EMI : [04] : ID : 150100464E58324D42 : VEN : SAMSUNG | DEV : FNX2MB : RAM : [ 1.00 GB ]
EMI : Init EMI from PRELOADER
INIT : 0xBC : DRAM [ 0x00000000 : [ 0 B ] ]
DRAM : DRAM: 0x80000000 [ 2.00 GB ]
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info
EMMC: CID : 13014E51324A3936521004BFC9C824B3
EMMC: VEN : MICRON : OEM : 78 : ID : 51324A393652 : PRV : 0x10
EMMC: VEN : MICRON : Q2J96R
EMMC: SNN : 79677896 ( 0x04BFC9C8 ) , MF : 2/2017
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3AB400000 [ 14.68 GB ]
SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]
CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : 616BAFA1FA67029E91BD9746BCEC482B
STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT
DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM11)
MODE : PRELOADER PORT
PORT : 11
Boot done!
Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA
Done!
Elapsed: 00:00:52
Reconnect Power/Cable!
Operation : Read Firmware [ v2.33 ]
ExtSparse : Enabled
ForceRead : Disabled
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1632 (COM6)
MODE : BOOTROM
PORT : 6
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000
TYPE : LEGACY [MTK]
BROM : MEID : 913EAE495C723D0A8DFDCD88ED478DC1
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x00000001
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6735
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 13014E51324A3936521004BFC9C872B3
DAInf: 4 : 2 : 155
DA : EXT_RAM NOT initialized!
eMMC : OK
eMMC : 514E011336394A32BF041052B372C8C9
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
DRAM : 0x0178
EMI : DEV : FireFly
EMI : SRC : preloader_ne1.bin
EMI : CNT : 0005
EMI : [00] : ID : 450100444634303136 : VEN : SANDISK | DEV : DF4016 : RAM : [ 2.00 GB ]
EMI : [01] : ID : 90014A484147346132 : VEN : HYNIX | DEV : HAG4a2 : RAM : [ 2.00 GB ]
EMI : [02] : ID : 150100514531334D42 : VEN : SAMSUNG | DEV : QE13MB : RAM : [ 2.00 GB ]
EMI : [03] : ID : 13014E51324A393652 : VEN : MICRON | DEV : Q2J96R : RAM : [ 2.00 GB ]
EMI : [04] : ID : 150100464E58324D42 : VEN : SAMSUNG | DEV : FNX2MB : RAM : [ 1.00 GB ]
EMI : Init EMI from PRELOADER
INIT : 0xBC : DRAM [ 0x00000000 : [ 0 B ] ]
DRAM : DRAM: 0x80000000 [ 2.00 GB ]
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info
EMMC: CID : 13014E51324A3936521004BFC9C824B3
EMMC: VEN : MICRON : OEM : 78 : ID : 51324A393652 : PRV : 0x10
EMMC: VEN : MICRON : Q2J96R
EMMC: SNN : 79677896 ( 0x04BFC9C8 ) , MF : 2/2017
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3AB400000 [ 14.68 GB ]
SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]
CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : 616BAFA1FA67029E91BD9746BCEC482B
STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT
DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM11)
MODE : PRELOADER PORT
PORT : 11
Boot done!
Patch Level : PPR1.180610.011
Display ID : 00WW_5_18D
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2020-09-05
Build Time : 27.08.2020
Product Model : NE1
Product Brand : alps
Product Name : NE1_00WW_FIH
Product Device : NE1
Product Manfct : alps
Product Info : NE1
MT6735__alps__NE1__9__00WW_5_18D__PPR1.180610.011__NE1
Read : preloader.bin
Read : proinfo.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : secro.img
Read : tz.img
Read : sys_info.img
Read : sutinfo.img
Read : hidden.img
ExtSparse : Compression ratio : 99%
Read : cda.img
ExtSparse : Compression ratio : 91%
Read : system.img
ExtSparse : Compression ratio : 73%
Read : cache.img
Read : userdata.img
FW Size : 1.13 GB
Android Info saved : _Android_info.txt
Scatter : MT6735_Android_scatter.txt
Saved to : C:\Users\Asus\Documents\Read Hp Normal\Nokia TA 1032\MT6735__alps__NE1__9__00WW_5_18D__PPR1.180610.011__NE1\
Done!
Elapsed: 00:09:06.
Hopefully this Nokia TA-1032 flash file is useful for everyone, don't forget to leave a comment if you have problems using our file.
Nokia TA-1032 (Nokia 3) Read CM2 Dongle Download Firmware
NOKIA
496.20MB
No Paswwrod Protected
ZIP